15 heat sealing terms, from dwell time to channel leak
A glossary of 15 sealing terms for packaging teams: dwell time, seal initiation temperature, hot tack, peel, burst and channel leak, with the standards and conditions behind each.
A glossary of 15 sealing terms for packaging teams: dwell time, seal initiation temperature, hot tack, peel, burst and channel leak, with the standards and conditions behind each.
How to get from an ECT value to a safe pallet stack: the McKee estimate, the ASTM D642 test, humidity and pallet losses, safety factors, and the usual mistakes.
GS1 Digital Link QR codes and digital watermarks both promise smarter packs. Here is what each asks of print, coding and vision inspection, and what trials show so far.
October 2026 market reports show rPET, rHDPE and rPP pulling apart. Here is what the spread to virgin means for bottle, closure and tub specs, and where each resin fits.
Albéa and other suppliers used Luxe Pack Monaco 2026 to push refill as a complete system. Here is how the formats compare and what FMCG teams can borrow.
How passive temperature-controlled shippers work, how EPS, PUR and vacuum panels compare, which refrigerants hold which band, and what ISTA 7E and USP 1079 ask for.
Mono-PE refill pouches promise 60 to 90 percent less plastic than rigid bottles. Here is what the published numbers compare, and why Danone’s claim changes matter to this category.
Pharmapack Europe returns to Paris Expo on 27-28 January 2027. Dates, venue, organiser themes, what to look for by role, and how to plan two short days.
A troubleshooting sheet for weak seals, channel leaks, contamination and laminate faults on VFFS lines, with the ASTM tests that confirm each fault and the first adjustments to try.
Pulpex has opened a 40-million-unit fibre bottle plant near Glasgow. Here is how the bottle is built, how it compares with other paper bottles and cans, and what to verify.