Quick answer: Pulpex has opened a plant near Glasgow rated at up to 40 million fibre bottles a year, with launch customers in still mineral water and liquid laundry. On the published information, the format is best suited to ambient, non-carbonated products where a brand wants paper-stream recycling and can accept a young supply chain. Cans are still the volume story in drinks: Crown reported global beverage can volume up 6% in the third quarter of 2026.
What opened in Glasgow, and what hasn’t been shown yet
Pulpex, the UK company that Diageo and the venture manager Pilot Lite launched in 2020, announced the plant in October 2026 at Westway Industrial Estate in Glasgow. According to Packaging Europe’s report, over 90% of the site’s initial capacity for the current year is already committed. Food and Drink Technology puts the job count at around 39, and the Scottish National Investment Bank and the UK’s National Wealth Fund backed the build.
Two launch customers are named. Purely Scottish Natural Mineral Water says it will be the first UK natural mineral water in a paper bottle, after an 18-month development programme with Pulpex. The refill brand smol is bringing fibre bottles to its liquid laundry range, which sits outside this beat but tells you the coating is being asked to hold a surfactant product as well as water.
The plant also acts as the reference site for a “Manufacture Under Licence” model. Regional converters would make the bottle closer to the brand owner, and Pulpex describes 40 million units as the first step toward 1 billion a year. Treat the billion as an ambition: no source gives a date or a named licensee.
For a sense of scale, Crown alone reported 82 billion beverage cans shipped in 2024 in its annual report. A 40-million-unit plant is a pilot-to-early-commercial volume in drinks terms, and large brands will read it that way.
How a Pulpex bottle is made
Packaging Europe describes the process: wet pulp from FSC- and PEFC-certified forests is injected into a porous mould and dried to give a single-piece bottle. Earlier coverage of the 2020 launch added that the pressed shapes were cured in microwave ovens before an internal spray coating was applied. There is no glued seam and no separate liner, which is the main structural difference from shell-and-liner designs.
The barrier is a sprayed coating. Pulpex calls it an “ultra-thin, water-based, food-safe” polymer dispersion in the smol launch coverage, and says the layer is thin enough for standard paper and card recycling. Formes de Luxe reported in 2021 that BASF was developing two coating types, one for oil-based and one for aqueous products, both free of PET, HDPE and BPA. Pulpex’s own materials say the bottle is free of hidden plastic layers, which is a claim about layers, not about the coating chemistry.
How much of the bottle is coating? A TriplePundit correction in November 2023 gave the figure as around 98% fibre-based, with a water-based spray-on barrier making up the rest. That is a 2023 outlet’s number, not a 2026 specification, and the plant’s production grade may differ.
The company says the bottle is engineered for existing filling infrastructure, so lines should not need major changes, and that direct-to-shape decoration is available. One practical note from the smol coverage: the closure is polypropylene, with the dosing cap in 100% rPP. A fibre body with a PP cap is still a mixed pack, and the recyclability story depends on how the cap and neck are handled at sorting.
Four ways to put a barrier in a fibre bottle
The hard part of any paper bottle is keeping liquid in and oxygen and moisture out. Four routes have appeared in public reporting, and they split the plastic differently.
| Design | Barrier construction | Fibre share, % (as reported) | Reported end-of-life route |
|---|---|---|---|
| Pulpex fibre bottle | Sprayed water-based polymer dispersion inside a one-piece moulded bottle | c. 98 (TriplePundit, 2023) | Household paper and card stream, per Pulpex |
| Paboco small bottle with fibre cap | Integrated HDPE inliner under 2 g | c. 85 (Fachpack, 2024) | Paper stream; barrier film removed at the mill, per Paboco |
| Paboco 500 ml spirits bottle (Absolut) | Integrated liner reported as PEN | 57 (interpack) | Paper shell separable by hand from the liner |
| Frugalpac bottle | Two recycled paperboard shells around a separate plastic pouch | 94 (TriplePundit, 2023) | User separates pouch from shell |
Bases differ between rows, and the sources don’t always say whether the percentage is by weight, so read this as a rough ranking and not a like-for-like measurement. The Paboco small bottle was designed for vitamins and supplements, according to Fachpack, though the maker says it’s used in beauty and personal care too. It is here for its construction, not as a drinks pack.

Carlsberg’s early Paboco-based prototypes used either a thin rPET film or a bio-based PEF film as the inner barrier, as The Drinks Business reported in 2020. Paboco’s own 2021 announcement described a next prototype with a fully integrated bio-based coating and a paper thread so the closure sits directly on the paper. P&G’s 2021 Lenor pilot used a thin recycled PET barrier, with the stated goal of removing it later. The direction across these projects is the same: less liner, then no liner.
The material properties table on this site gives typical values for PET, glass, aluminium and board if you want to see what a coated fibre wall has to match.
Claims worth checking before a brief goes out
Recyclability. Pulpex says the bottle goes through normal household paper and card streams, and cites tightening rules, including the EU’s Packaging and Packaging Waste Regulation and the UK’s Extended Producer Responsibility regime. The PPWR is the EU’s packaging law and it sets recyclability and recycled content requirements; for the detail see ppwreu.org and check the current text. Whether a given paper mill accepts a moulded bottle with a polymer-dispersion coating is a question for the mill and your recyclability assessor, not for a press release.
Commentary sites are blunter about the category. One, Packaged Sustainable, argues that composite paper bottles can fail curbside sortation when liners don’t separate, and that acceptance varies by municipality and sorting facility. That is an opinion piece, not a test, but it names the right risk: moulded bottles are three-dimensional and sort differently from flat board.
Carbon. Early coverage of Pulpex’s launch repeated its claims of roughly 90% lower emissions than glass and about 30% lower than PET. The commentary above notes these figures haven’t appeared in peer-reviewed or third-party-verified life cycle assessments. Ask any supplier for the LCA report itself, its functional unit and its system boundary, and the recycled content assumed for the PET and glass comparators.
Carbonation and heat. A 2020-era summary on Plastic Free reported that carbonated and hot-filled liquids weren’t yet suitable for Pulpex bottles, and that the company was working on it. The 2026 launches are still water and laundry liquid, which is consistent with that, but treat the older statement as an early report and confirm the current envelope in writing.
Shelf life. Diageo’s 2020 announcement referred to at least 12 months for its whisky bottle. For water the relevant limits are moisture loss through the wall and taste pick-up from the pulp, and neither Pulpex nor Purely Scottish has published a shelf life figure for the fibre bottle in the coverage reviewed here. Purely Scottish’s website quotes over 12 months for its existing boxed product, which is a different pack.
Cans as the benchmark for growth
It would be easy to read the Glasgow opening as a sign that drinks are heading toward fibre. The demand data points in a different direction for volume. Crown told investors on its third-quarter 2026 call that global beverage can shipments rose more than 6%, including double-digit growth in Asia, 6% in North America and 4% in Europe. CEO Tim Donahue called it a “global growth spurt” and linked it to growth in beverages and to substrate changes, which is can-maker language for brands moving out of other formats.
Packaging Dive reported that Crown passed through about $240 million of higher metal costs in the Americas beverage business, and that the company expects contractual recovery of other cost increases in 2027. A transcript summary says management expects to be “sold out” in North America in 2027, and that more than 90% of capacity at its first Indian beverage can plant, which broke ground in Uttar Pradesh in September 2026, is already under contract.
Two things follow for a paper bottle project. First, cans are tight on capacity in some regions, so a brand that wants a can may wait for one. Second, cans win where carbonation, light barrier and long distribution are non-negotiable; fibre bottles are being launched into the formats cans don’t serve well, such as still water in a bottle shape and household liquids.
Where each format fits, on published evidence
- Still water or juice in a bottle: a coated fibre bottle is a candidate if the brand accepts a first-generation supply chain. Ask for stability data at your fill temperature and storage conditions.
- Carbonated drinks and beer: published fibre bottles for beer (Carlsberg’s Paboco prototypes) used a plastic film barrier. Cans, PET and glass have the track record.
- Premium spirits: Absolut’s 500 ml Paboco bottle shows a paper-heavy design with a plastic liner, and the brand says it is eight times lighter than glass. That is the brand’s claim; check the basis.
- Home care liquids: smol’s Pulpex launch is the first named commercial case in the sources, so watch for performance feedback after launch.
What this means for you
R&D and packaging engineering. Ask any fibre bottle supplier for the barrier construction in grams, not adjectives. “Free of hidden plastic” and “under 2 g liner” are different claims. Request oxygen and water vapour transmission data with the test conditions (for example ASTM D3985 for oxygen, ASTM F1249 for water vapour, with temperature and humidity stated), and a stability plan for your product, not the supplier’s reference product. Use the fill and headspace calculator to check the volume your filler will see, because a rigid fibre wall does not give like PET.
Filling and operations. Pulpex says compatibility with existing filling lines is built in. Verify neck finish, top-load strength, conveyor behaviour and what happens when a bottle gets wet on the line. Run it as a trial with your own filler and QA team, not as a desk exercise.
Procurement. The plant is committed above 90% for its first year, so capacity for a new entrant may be limited until licensees come online. Ask for lead times, second-source plans and the licensee roadmap. Don’t build business cases on indicative bottle prices from commentary sites; ask your supplier for a quote and put the numbers into the pack cost calculator with your own inputs.
Sustainability and compliance. Get recyclability confirmed by your recycling assessor against the current rules in your sales markets, and include the cap, label and any sleeve. Put the LCA claims through the same scrutiny you would apply to a PET or glass claim. The lightweighting calculator can help you size the material change per pack once you have real weights, and the printable checklists are a useful base for a supplier audit.
Design and brand. Pulpex says direct-to-shape decoration is possible, and Paboco’s CEO has said paper takes embossing and debossing well. Both are supplier statements; ask for physical samples under retail lighting and check how the surface handles condensation, since a chilled bottle in a wet fridge is a different test from a dry shelf.
Sources
- Recycling Today: Pulpex opens paper bottle facility in UK
- Packaging Europe: Pulpex opens first commercial facility for paper bottle manufacturing
- Food and Drink Technology: Pulpex opens first commercial paper bottle factory in Glasgow
- Pulpex: Pulpex opens first commercial fibre bottle factory in Glasgow
- Packaging Scotland: Pulpex opens manufacturing facility near Glasgow
- Packaging Europe: Smol and Pulpex launch pulp fibre laundry detergent bottle
- Formes de Luxe: BASF to develop Pulpex paper bottle barrier solutions
- TriplePundit: Are Paper Bottles the Future of Beverage Packaging?
- Fachpack: Paper Bottles, the Idea Becomes a Market
- interpack: Inside Paboco’s Quest for the Ideal Paper Bottle
- Paboco: Paboco reveals a prototype of the next generation paper bottle
- The Drinks Business: Diageo unveils plastic-free paper Johnnie Walker bottle
- Packaging Dive: Companies lean into paper packaging innovations amid scrutiny of plastic
- Packaged Sustainable: Paper Bottles vs Glass vs Plastic
- Plastic Free: Pulpex Pulp Bottles
- Packaging Dive: Crown touts ‘global growth spurt’ for beverage cans
- Motley Fool: Crown (CCK) Q3 2026 earnings call transcript
- Crown Holdings: Annual report to shareholders, FY2024
Header image: official press image from pulpex.com.

