Quick answer: The beauty suppliers at Luxe Pack Monaco 2026 (28 to 30 September) treated refill as a system with a filling method, a closure and a recycling stream, not as a spare container. For FMCG teams the most transferable idea is a refill pack that runs on existing filling equipment and sits in the same recycling stream as the outer pack, which is the claim Albéa makes for its Fill-Up tube.
All figures below are supplier or trade press claims, measured against each supplier’s own reference pack. I haven’t handled or tested any of these packs, so treat the numbers as starting points for your own questions to suppliers.
What Albéa put on the table
The trigger for this piece is Premium Beauty News’s report of 26 October 2026. It says Albéa used Luxe Pack Monaco to present work on eco-design, refillability, sensory appeal and visual differentiation. The Cosmetics & Fragrance side showed two collections, Kute Beauty and Makeup by Albéa.
Within Kute Beauty, the new 30 ml Amara tottle comes in dome and flat designs, both 100% polypropylene. The Nano Pop stick is described as an airtight monomaterial format for on-the-go use. Albéa told the publication it is looking at making further Kute Beauty formats monomaterial where they don’t yet line up with the EU Packaging and Packaging Waste Regulation (PPWR), and at options with post-consumer recycled content.
On the tubes side, the company marked 70 years since its first cosmetic tube. Its CEO, François Tassart, said in the show announcement that the aim was “PPWR-ready packaging experiences”. PPWR is the EU regulation on packaging design, recyclability and reuse; for the detail, and to check the current text, see ppwreu.org.
The refill items matter most for this beat. Formes de Luxe reports that Albéa’s Endless Kiss refillable lipstick can be refilled up to 10 times and is said to cut material use by 62% over its life cycle against a classic lipstick pack. It also reports on the Fill-Up Tube, a rigid, spill-free, monomaterial PE refill that is cut open at the top. That is the more interesting one for everyday products.
Five ways beauty is solving refill
Premium Beauty News’s own five-trends report frames the shift well: the challenge is no longer to offer a reusable container but to build complete systems that make refilling practical. The formats on show fall into a handful of mechanical families, and each one trades something.
| Refill format | Example (source) | Materials reported | Main trade-off |
|---|---|---|---|
| Refill pouch | L’Occitane pouches; Towards Packaging figure of 80% less plastic, via Beauty Packaging | Flexible film (not detailed in the source) | Pouch is lightest, but Albéa positions Fill-Up against “doypack” spill risk |
| Cut-open refill tube | Albéa Fill-Up Tube | PE; Greenleaf 330 µm sleeve; EcoFusion Top closure | Rigid tube is heavier than a pouch; tear-line opening is a new gesture |
| Inner cup in outer jar | Albéa Twirl and Polaris; Eurovetrocap Celine | PP cup; outer jar in PP, PET or glass depending on model | Two bodies to make, fill and collect; outer jar must last |
| Airless cartridge | Lumson XTAG (2024 show) | Glass outer; refill cartridge with pouch attached to pump | More components; premium cost and assembly |
| Connector refill | Berlin Packaging FUTURefill; Silgan Replay Connector | Glass bottle; connector keeps pump clean | Refill only works with the original pump, which limits reuse across brands |
Berlin Packaging’s FUTURefill, shown at the 2025 edition, is a useful case because of what it controls. According to Formes de Luxe, the refill arrives in the same 30 ml glass bottle as the main product, sealed with a service cap, and works only with the original pump. That is a design choice about who can refill with what, and it matters for any product where dosing or hygiene depends on one specific dispenser.
The refill tube and why it suits existing lines
Albéa describes Fill-Up as an alternative to traditional refill pouches. In a 70th anniversary interview, the company says integrated tear lines let consumers open it for refilling, the pack keeps the visual identity of the original, and it stays compatible with existing tube-filling equipment. The tube was developed with L’Occitane and won the Sustainability category at the ETMA Tube of the Year 2026, as reported by Aluminium Journal.
The weight numbers are modest, and that is worth noticing. Albéa’s product page says Fill-Up with a 330 µm Greenleaf sleeve cuts weight and carbon footprint by 9% against a standard 400 µm PBL tube. The pitch is therefore less about a lighter refill than about replacing a flexible pouch with something that behaves like the main pack and recycles with it.
The L’Occitane precedent shows how that thinking builds up. In its 30 ml hand cream relaunch, Premium Beauty News reports that moving from an aluminium barrier laminate (ABL) tube to an APR-certified Greenleaf tube with an OctoTop closure reduced materials from 5 to 2 and components from 3 to 2. It also lowered tube weight by 23%. Albéa says the project took two years of co-development and rested on a certified life cycle analysis.

Reading the weight claims
The chart above puts four whole-tube weight claims side by side, but the baselines differ. EcoFusion Top’s 55% is stated for a D50, 200 ml tube combining the closure with a 350 µm Thin-Wall sleeve, against a standard head and cap with a 500 µm sleeve, per Albéa’s own footnote. The 47% for Clarins sample tubes comes from the Clarins and Albéa announcement, which also reports 45% recycled content and an all-HDPE build. The 23% and 9% are the L’Occitane figures above.
Closure-only claims run higher and shouldn’t be mixed with these. At the 2025 show, Albéa’s OvalSlim Top was reported by Formes de Luxe at 2.05 g against 8.3 g for a standard screw cap and head, a 75% cut for that part alone. Merging head and cap into one flip-top part is where most of the saving comes from.
The sleeve itself has thinned as well. The next chart shows the wall thicknesses named in the sources above, each tied to a different comparison, so read it as a ladder of reference points rather than a like-for-like test.

Albéa’s Weleda shower gel tube, which took the plastic category at the same Tube of the Year awards, uses a mono-material HDPE build with a PCR Max sleeve at 350 µm. Aluminium Journal reports more than 57% post-consumer recycled content excluding the cap, and design for existing HDPE rigid streams. To turn thickness and grammage into pack-level savings on your own formats, the lightweighting calculator does the arithmetic.
Mono-material is the common thread
Across the 2026 and earlier launches, the material pattern is steady. Rigid refillable parts are going to PP: Albéa’s Polaris jar and Twirl system, Pure Drop (a 30 ml dropper in 100% PP with three parts instead of the standard four or five, per Industries Cosmétiques), and the all-PP pumps that several suppliers now show. Tubes are going to PE, with an HDPE closure and a multilayer HDPE sleeve replacing aluminium.
The barrier question comes with it. Quadpack’s eye cream tube, reported by Formes de Luxe, is offered either as a five-layer ABL or as PE, mono-layer or five-layer with an EVOH barrier for formula protection. Albéa’s Re(Flex) laminate tube has a metallised coating said to be under 1 µm thick, which the supplier says allows recycling in rigid HDPE coloured streams, and the tube is 95% PE. A thin metallic layer or an EVOH layer is a trade you make against recycling claims, so ask for the stream-specific evidence (APR, RecyClass or a national scheme) and check the current rules behind it.
Mixed materials still appear where the product is premium. The older Twirl jar had a PET base and cap with a PP refill, according to the 2022 Formes de Luxe round-up, and Albéa’s later Polaris moved to PP. Glass outers with PP refill cups, like Eurovetrocap’s Celine, accept two materials on purpose: the glass stays, the cup is the part that gets replaced.
Small runs and fast starts
One practical detail from the Premium Beauty News trends report is how refill is being sold in small quantities. Coverpla offers a stock-based range from 1,000 units, together with Techniplast’s refill system and Aptar’s Nomad Refill. Bormioli Luigi is working on 100 ml refillable fragrance bottle formats, and Silgan Dispensing has a screw-on pump, the Melodie Pirouette SNI 13, for a molded glass bottle made with Pochet.
Albéa’s own Signature range, announced earlier this year, aims at faster launches with smaller production runs. The common idea is that refill programmes get tested on a limited number of units before a full rollout, which keeps the pilot cheap to stop.
What FMCG can borrow
Beauty carries higher unit values than most food, drinks or home care, so some of this will not transfer directly. Glass with a connector mechanism is hard to justify on a washing-up liquid. Three ideas do translate.
- Refill that behaves like the main pack. Fill-Up is built so the filler can use existing tube equipment and the consumer sees a familiar pack. A refill in the same material family as the outer pack avoids a sorting argument at end of life.
- A defined gesture. Albéa’s marketing director for Cosmetics & Fragrance said in the Polaris launch material that refill adoption depends on making it simple. The invisible-hinge jar, the guided-screw Twirl and tear-line tubes are all attempts to make the refill step obvious.
- A weight claim with its baseline attached. Every figure in this article only means something against a named reference pack and sleeve thickness.
One limit deserves a flag. The 80% plastic reduction for L’Occitane pouches is a figure quoted by Beauty Packaging from a market-research firm, Towards Packaging, so I’d treat it as a claim to ask about, not a measured result. Whether a refill format beats a standard pack depends on how many times it is actually refilled, which none of these sources report as consumer data.
What this means for you
R&D and packaging engineering. If you run tube or bottle lines, ask suppliers a direct question: does the refill format run on the filling equipment you already have, and at what speed? Albéa makes that claim for Fill-Up; get the same statement in writing for any pouch, cup or connector option, along with the trial conditions.
Procurement. Request weight per pack with the reference pack named, sleeve or wall thickness, closure weight and recycled content (and whether the figure excludes the cap, as in the Weleda tube). Small-run stock formats, such as those at 1,000 units from Coverpla, are a way to pilot refill before tooling. Use the pack cost calculator with your own supplier quotes; ask your supplier for a quote rather than relying on published ranges.
Design and brand teams. Decide who the refill is for. A connector system locks refills to the original dispenser, a cut-open tube keeps a familiar look, and a cup-in-jar format needs a visible outer pack that people will keep. The material properties table helps when comparing PP, HDPE and PET options for the outer.
Quality and sustainability teams. Check recyclability against the stream you actually sell into, and check the current text of the rules, starting at ppwreu.org. Ask whether a metallised or EVOH layer changes the recycling claim for your market. A printable checklist for supplier questions is available in the downloads section.
Sources
- Premium Beauty News: Albéa unveils new packaging concepts for makeup, skincare and fragrance
- Premium Beauty News: High-end packaging, 5 trends spotted at Luxe Pack Monaco 2026
- Sustainable Packaging News: Albéa at LUXE PACK Monaco
- Formes de Luxe: Refillable luxury solutions to discover at LUXE PACK Monaco
- Albéa: Fill-Up Tube
- Full Beauty Suppliers: Albéa Tubes is celebrating its 70th anniversary
- Aluminium Journal: Aluminium solution wins prototype award
- Premium Beauty News: L’Occitane selects Albéa’s recyclable tube for its 30 ml hand cream
- Cosmetics Business: Albéa’s EcoFusion Top range
- Premium Beauty News: Clarins and Albéa Tubes partner for lighter samples with recycled plastic
- Formes de Luxe: LUXE PACK Monaco 2025 innovation roundup, Day 3
- Formes de Luxe: LUXE PACK Monaco 2025 innovation roundup, Day 1
- Formes de Luxe: LUXE PACK Monaco 2025, the packaging innovations to look out for
- Formes de Luxe: Innovations from the show floor, LUXE PACK Monaco 2022, part 1
- Industries Cosmétiques: Albéa Cosmetics & Fragrance is shaping the future of responsible packaging
- Premium Beauty News: Albéa launches Signature
- Beauty Packaging: Beauty shifts into Refill 2.0
- Premium Beauty News: Luxe Pack Monaco, sustainability is increasingly desirable

