Quick answer: A reusable pack beats a single-use one only if it survives more washes than its break-even point, and published cup studies put that point anywhere from 10 to 670 uses. Sulapac says its biocomposite Solid cups last between 125 and 300 washes depending on the page you read, so the margin is wide against some comparisons and thin against others.
This piece rests mainly on Sulapac’s own web pages and press releases, plus Packaging Europe’s award coverage; independent data is noted where it exists (a UNEP life cycle review and academic studies). Figures are as published and checked on 12 November 2026.
What the Reuse finalist is
Packaging Europe’s Sustainability Awards 2026 finalist list includes a new Reuse category. Sulapac and Hesburger are listed there for Sulapac Solid 2.0, a biobased, dishwasher-proof material for reusables, alongside Xipa’s reusable 1 kg ice cream container, Sykell, Bockatech and KIUD with Telia. Packaging Europe published a finalist interview with Sulapac on 11 November 2026.
The commercial side comes from Sulapac’s Hesburger announcement. All 69 Hesburger outlets in Lithuania now serve drinks in reusable Sulapac cups. Hesburger’s Global Sustainability Manager says Lithuania went first because of a national rule passed in May 2025, and that customers can choose between a reusable and a paper cup. The chain’s stated aim is reusable tableware in all restaurants by 2030.
How the material is built
According to Sulapac’s reusables page, Solid combines biodegradable biopolymers with naturally occurring clay minerals, which gives a ceramic look, feel and even sound. It is an injection moulding material for cups, plates, bowls and containers, with 100% USDA certified biobased content. Colours are natural, white and black.
One processing detail matters to anyone moulding it. For a heat-resistant part (HDT-B 130 °C), the mould temperature has to be at least 100 °C. That is a tooling and cycle-time question to settle with the supplier, not a footnote.
The same grade is not limited to tableware. Sulapac lists Solid 2.0 for reusable tableware and for cosmetic caps and closures, where it replaces thermosets such as Thermodur or Bakelite. A cosmetics closure and a burger-chain cup share one compound, which is a useful reminder for FMCG teams that premium-pack materials can cross into high-volume reuse.
On carbon, Sulapac quotes 0.57 kg CO2eq/kg for Solid. That is per kilogram of material, so it says nothing about a finished cup until you know the cup’s weight and how many times it is used.
Three wash-cycle numbers, one material
Sulapac’s own pages disagree with each other, which is worth knowing before you put a number in a business case. The injection moulding page says dishwashability was tested to EN 12875 with 125 washing cycles. A passenger transport page says products can withstand approximately 200 cycles. The homewares page says cups have been tested to last up to 300.
The three figures probably reflect different protocols, detergents and temperatures. Ask for the test report behind each one.

Source: Sulapac web pages (durability claims); Recyc-Quebec 2015 and Huhtamaki 2019 via a reusable cup LCA benchmark; VTT 2019 via UNEP review. Typical published figures, not specifications.
The chart sets Sulapac’s three durability figures (125, 200 and 300) beside three published break-even counts (about 20 for reusable plastic, 130 for stainless steel, 350 for ceramic). Durability claims and break-even points are different kinds of number, but both are counts of uses, and the gap between them is what decides the outcome.
Where break-even sits
The UNEP review of beverage cup LCAs found that most studies put the break-even between 10 and 670 uses, depending on materials compared, end-of-life assumptions and washing assumptions. Washing is the largest contributor to a reusable cup’s life cycle impact, followed by manufacturing.
A separate LCA on deposit return systems reports climate break-even generally within 10 to 50 uses, depending on material. The same study found that single-use polypropylene cups outperform reusable options for acidification, eutrophication and water scarcity. Climate is one impact category, and the answer can change with the category you pick.
Our calculation: take the lowest durability claim (125 cycles) and the 20-use plastic break-even from the benchmark below: 125 ÷ 20 = 6.25, so a cup would have about six break-evens of headroom. Against the 350-use ceramic figure, 125 ÷ 350 = 0.36, so the cup would fall short. These ratios only show the spread; no Sulapac break-even was in the sources used here, and a lost or unreturned cup never reaches any of them.
| Reusable cup option | Published climate break-even (uses) | Durability figure | Trade-off in the sources |
|---|---|---|---|
| Sulapac Solid 2.0 biocomposite | No figure in the sources used | 125 tested to EN 12875; up to 300 claimed by Sulapac | Biobased, ceramic feel; evidence is mostly supplier data |
| Reusable plastic cup | About 20 (Recyc-Quebec 2015, Huhtamaki 2019, as quoted in a benchmark study) | Not stated in sources | Lowest break-even in that comparison |
| Stainless steel | 130 (same two studies) | Not stated in sources | Needs many more uses to pay back than plastic |
| Ceramic | 350 against a PE-lined paper cup (VTT, 2019, in the UNEP review) | 1,000 reuses considered | Slush ruled out porcelain and glass for safety and convenience |
What reuse teams in FMCG can borrow
Three structural points stand out, and they apply as well to a refillable shampoo bottle or a returnable ice cream tub as to a cup.
Collection is part of the pack. For the Slush event, the cups come from Kamupak, a Finnish reusable-packaging-as-a-service company, and are collected at end of life by Lassila & Tikanoja. The owner of the cup is not the venue, which changes who carries washing, loss and replacement.
End of life is designed in. In a pilot with TripleW, used Solid cups were collected, ground and broken down by hydrolysis into building blocks including lactic acid. The companies report full recovery of the lactic acid in the scale-up. The pilot is a trial, and Sulapac and TripleW say they plan to grow the volumes collected.
A choice can sit beside the mandate. Hesburger offers reusable and paper side by side, which gives it return-rate data without forcing every customer onto the new system.
On regulation, the EU Packaging and Packaging Waste Regulation (PPWR) contains reuse and refill provisions for some pack types; check the current text at ppwreu.org.
What this means for you
- R&D and engineering: request the full test protocol behind any wash-cycle claim (EN 12875 cycle count, water temperature, detergent). Ask the supplier which of the 125, 200 or 300 figures applies to the grade and wall thickness you plan to use.
- Quality teams: check food contact status for repeated use under your own market rules. Sulapac points to Regulation (EU) No 10/2011 for repeated use; confirm the current text with your regulatory team, and note that Sulapac’s thermoforming guidance recommends your own organoleptic testing when the material contains wood.
- Procurement: ask suppliers for a quote based on cycles per unit, not unit price alone. Free tool: the pack cost calculator works out cost per 1,000 packs from your own prices, which you can divide by expected uses.
- Brand and design: test return rate before scaling. If cups, tubs or refill bottles leave the system before reaching break-even, the benefit in the studies above does not materialise.
- Sustainability and LCA owners: run the comparison on more than climate. The academic study cited above shows single-use polypropylene winning on three other impact categories.
Sources
- Packaging Europe: Announcing the finalists of Packaging Europe’s Sustainability Awards 2026
- Packaging Europe: Sustainability Awards 2026 finalists, Reuse category list
- Sulapac: Hesburger’s shift to reusable tableware starts from Lithuania
- Sulapac: Biobased material for reusable tableware
- Sulapac: Sustainable materials for injection molding
- Sulapac: Biobased material for kitchenware, tableware and home accessories
- Sulapac: All aboard the green journey
- Sulapac: Sulapac Solid, the ultimate plastic replacement in reusable tableware
- Sulapac: Slush advocates the circular bioeconomy
- Sulapac: Thermoforming with Sulapac Flow 1.7
- Packaging Insights: Sulapac and TripleW launch recycling pilot for bio-based cups
- Interplas Insights: TripleW partners Sulapac to help eliminate single-use plastics
- UNEP: Recommendations from Life Cycle Assessments, single-use beverage cups
- Academia.edu: Assessment of the environmental break-even point for deposit return systems through an LCA analysis of single-use and reusable cups
- ResearchGate: Reusable coffee cups life cycle assessment and benchmark
Header image: official press image from sulapac.com.

