How paper water bottles are built: Pulpex, Paboco, Frugalpac

Quick answer: The paper bottle that Life Water unveiled on 17 November 2026 uses Pulpex moulded-fibre technology: a one-piece wood-pulp shell with a thin sprayed barrier coating, and no plastic liner. Paboco and Frugalpac keep a plastic barrier inside a paper shell, which is a different trade between barrier proof and paper-only recycling. Reports of the Life Water launch don’t give bottle size, closure or whether the water is still or sparkling, so check those with the supplier.

This piece rests mainly on statements from Pulpex, Life Water, Frugalpac and Paboco, plus trade press reporting them; independent test data is rare and is flagged where it appears. Frugalpac sells a paper bottle and has an interest in the policy argument covered below.

What Life Water actually launched

Packaging News reports that the bottle uses moulded-fibre technology, with wood fibre formed into a functional water bottle. A company director says it is made from renewable resources and designed to be recycled as paper.

FoodBev adds the commercial picture: Life Water is targeting hospitality, foodservice, retail, travel and live events. The bottle has a clean white finish and bold typography. That is all the public detail I found, so the construction below comes from Pulpex’s other launches.

How a Pulpex bottle is made

Packaging Europe’s report on the smol laundry bottle describes the process in Pulpex’s own terms: wet forestry pulp is injected into a porous mould and dried to give a single-piece bottle. The fibre comes from FSC- and PEFC-certified forests. A 2020 Food Engineering report on the original Diageo-backed project described a slightly different sequence: pulp pressurised in moulds, cured in microwave ovens, then sprayed internally with coatings matched to the liquid.

The coating carries the barrier job. Pulpex describes it as an ultra-thin, water-based, food-safe polymer dispersion, and says it is thin enough for standard paper and card recycling streams. Kraft Heinz’s 2022 announcement said the spray is customised for either oil-based or aqueous products.

Early profiles named Stora Enso as pulp supplier and Solenis and BASF as barrier partners. The same profile noted that virgin fibre was used because recycled pulp can’t be used for food and drink under food safety rules. Check whether that still holds for the grade you’d buy.

No public barrier figures turned up for this coating. When you ask a supplier, ask for oxygen and water vapour transmission with the test method and conditions written next to the number (for example OTR to ASTM D3985 at a stated temperature and humidity).

Three ways to put a barrier in a paper bottle

The shell is the easy part. Water, juice and especially sparkling drinks need something that keeps liquid in, gas in or out, and the fibre from going soft. Three routes are on the market, and they differ in what you separate at end of life.

Format Shell Barrier End of life as claimed Main trade-off
Pulpex (Life Water, smol, Purely Scottish) One-piece moulded wood pulp Sprayed water-based polymer dispersion Whole bottle to paper stream (Pulpex claim) Coating performance on carbonated or long shelf-life drinks isn’t public
Paboco Paper shell with paper threaded neck Thin PE coating inside (current prototype) Company says PE barrier is common for paper recycling Some third-party commentary doubts recyclability of earlier generations
Frugal Bottle (Frugalpac) Recycled paperboard, assembled round a liner Separate food-grade plastic pouch Pull pouch out, bin paper and plastic separately Relies on the consumer separating two parts
100% rPET bottle (Frugalpac’s comparator) None The bottle wall Established PET collection 64 g of plastic per bottle in Frugalpac’s comparison

Paboco. Packaging Europe reports that its next-generation prototype continues to have a polyethylene coating on the inside and a paper threaded neck so the cap screws straight onto the bottle. TriplePundit’s 2023 review described first-generation bottles as 57 percent paper with an integrated recyclable plastic barrier, and said third-generation bottles weren’t readily recyclable because of the plastic liner. Paboco’s route has also been tried with a thin recycled PET film and a bio-based PEF film in the Carlsberg pilots.

Frugal Bottle. Packaging Europe describes a recycled paper body with a food-grade pouch made from a PE metallised polyester laminate, the same material used in bag-in-box wine. The Drinks Business reported at launch that it was 94% recycled paperboard; Frugalpac’s November 2026 statement says 100% recycled paperboard. The difference may be shell versus whole pack, so ask which.

Zipform. A fourth route, reported by Packaging Europe, is 95% wood-based fibre with over 50% post-consumer recycled content and a moisture and oxygen barrier layer in place of a plastic liner.

The chart shows the fibre share each company has reported. Definitions differ (paper, recycled paperboard, wood fibre) and the years differ, so read it as direction, not a league table.

Fibre share of paper bottles, as reported by each company. Reported fibre or paper share: Paboco gen 1 (2023) 57, Pulpex (2023, 90%+) 90, Frugal Bottle (2020) 94, Zipform (2024) 95 (percent by weight)
Fibre share of paper bottles, as reported by each company
Source: TriplePundit (2023), Pulpex Series C release via CMPC (2023), The Drinks Business (2020), Packaging Europe (Zipform); company-reported, definitions differ

Our calculation. Packaging Europe reports Frugalpac’s figure of 15 g of plastic per bottle against 64 g for a 100% recycled plastic bottle. That is 64 g minus 15 g = 49 g less plastic per bottle, and 49 / 64 = 76.6%, which matches the company’s “77% less”. Across 1 million bottles, 49 g each is 49 tonnes of plastic. Free tool: the lightweighting calculator does this sum for your own pack weights.

Closures and end of life

A fibre body still needs a cap. The smol bottle uses a polypropylene cap, with a dosing cap in 100% recycled PP. Pulpex’s own recycling claim therefore covers the bottle, with the cap removed and sorted separately. Paboco’s answer is the paper closure developed with Blue Ocean Closures, announced as a prototype with brand rollouts expected in 2023; I found no confirmation of a commercial launch.

Recycling claims are the weakest link in public data. An industry blog, Packaged Sustainable, notes that acceptance varies significantly by municipality and material recovery facility. Treat “recyclable as paper” as a design intent until your target market’s paper mills and sorters confirm it.

Scale: plans have moved

The capacity story has shifted, so date every figure you’re given. In July 2023, CMPC’s release said a Cambridgeshire line would produce up to 12.5m bottles a year from Q1 2024 and spoke of over 2bn bottles by 2028. In February 2025, edie reported the Glasgow plant was aiming for 50 million bottles a year.

Packaging Europe reports the plant opened on 8 October 2026 with initial capacity of up to 40 million units a year, and ESG Today says the long-term goal is one billion units a year. Pulpex says more than 90% of initial capacity for the current financial year is committed. Perlen Industrieholding is the first licensed manufacturer in Europe, with exclusivity in Switzerland, Austria, Italy and southern Germany.

Money followed on 17 November 2026. Packaging Gateway reports a further £19.6m from the National Wealth Fund as part of a £24.6m round, including £4.4m from the Scottish National Investment Bank. The balance of about £0.6m comes from existing backers (our arithmetic: 24.6 less 19.6 less 4.4).

Why the UK glass fee change matters to this format

UK pEPR is the scheme that charges producers for the cost of managing packaging waste. Defra has announced that glass drinks containers supplied directly by producers to pubs, restaurants and other licensed venues will carry no pEPR fees from April 2027, and it plans to consult on faster discounts for packaging rated highly recyclable under the Recyclability Assessment Methodology. For the detail of EU and UK rules, see ppwreu.org, and check the current text before relying on any of this.

Frugalpac’s chief executive Malcolm Waugh argues the change confuses making glass cheaper with making drinks packaging greener. The Foodservice Packaging Association separately warned that reductions for glass shouldn’t transfer fees to producers using other materials. Life Water lists hospitality first among its targets, which is exactly the channel where the glass fee disappears. How a Pulpex bottle is classified for fee purposes is a question for your EPR adviser, not something these reports settle.

What this means for you

R&D and packaging engineering. Decide the drink first: still, sparkling or hot-fill. Ask each fibre-bottle supplier for filled-bottle shelf-life data, barrier values with test conditions, and line trials on your fillers. Pulpex says its bottles suit existing filling infrastructure; the company says no major line modifications are needed, which is a claim to verify on your line.

Procurement. Capacity is small and mostly sold: 40 million units a year at Glasgow against over 90% committed for the current year, per Pulpex. Ask about licence partners near your fill sites and about caps, since PP closures add a second supplier. Free tool: the pack cost calculator lets you put quoted prices side by side; ask each supplier for a quote, as none is published.

Design and sustainability teams. Write recyclability claims for the part the consumer can act on, and confirm paper-stream acceptance in each market. Choose between a coating (nothing to separate, less public barrier data) and a pouch or film (proven barrier, a step for the consumer).

Finance and regulatory. Re-run your UK fee model once Defra’s consultation on modulation is published, and keep the glass versus fibre comparison on a per-pack basis with dated fee tables.

Sources

Header image: official press image from pulpex.com.